Lian Li O11D EVO RGB E-ATX Gaming Dual Chamber case – ARGB Lighting Strips – Up to 420mm Radiator – Cable Management – Front and Side Tempered Glass Panels – Reversible Chassis (O11DERGBX.US)
$25.99
Related Products
Product description
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. EVO RGB PC Case Merchant Video
1 UNOBSTRUCTED VIEW
2 COMPATIBILITY
3 FAN/RADIATOR SUPPORT
Seamless view: Remove the front support pillar without affecting the structural integrity of the case. This allows for a completely uninterrupted view of everything inside the chassis.
Increased size: Provides ample room for the latest gaming hardware. Thanks to this expansion, the main compartment can facilitate large graphics cards, with 455.7mm clearance and seven expansion slots.
Features two 1.5mm L-shaped RGB strips that sit at the top and bottom of the tempered glass panels. These strips are easy to control with beautiful lighting options available.
Easy for builders: For starters, the internal layout of the chassis can be adjusted as there are two height options for motherboard installation. This means there are different ways to set up your fans and CPU cooler, providing different performance options and aesthetics.
Cable management friendly: Comes with Velcro straps and dual-layered clips, which can tidy up both your large and small cables together into an easily managed bundle. Moreover, the PSU mounting bracket protrudes 15mm out from the case, which provides additional space for cable management.
9 reviews for Lian Li O11D EVO RGB E-ATX Gaming Dual Chamber case – ARGB Lighting Strips – Up to 420mm Radiator – Cable Management – Front and Side Tempered Glass Panels – Reversible Chassis (O11DERGBX.US)
Add a review
$25.99
Alex –
Amazing Case
This is a great case. It feels sturdy and refined. It’s massive and offers a lot of space for large graphics cards or extra storage. The LEDs look amazing. The case feels ergonomic, enabling future part changes and great options for cable management.The one downside is that its size and weight may limit its usage on smaller desks. Because it is so bulky, it may be cumbersome to move frequently, like if you are in a dorm.
CG1026 –
100% worth it!!
I was reluctant to spend more than $100 on a new case (since there are cheaper similar designs from other brands), but this is completely worth it!! I love the overall aesthetic, and there is plenty of room for cooling and larger gpus.The materials are high quality and it is super sturdy. Building in this case is really easy as well, and it is very configurable. Only wish there was slightly more space for cables in the back.Airflow is excellent – and one of the driving factors behind me picking it (my GPU was getting really hot in the old case).One thing I was sad about is that if you want to flip the orientation of the case, you have to mount the motherboard upside down. I did all the work to orient the case so the glass would be on the right side just to find out that my computer hardware would be upside down, and I didn’t like that look at all – so PSA for people wanting to do that.I’m very happy I decided to go for this case, my computer looks so pretty in it and the airflow is keeping my GPU happy!
Handy –
Absolutely Gorgeous Case and absolutely huge : )
Update: 10-2-25 This is still the best case I have ever built in. Still going strong after almost 2 years and I still would pick this case over any other I have seen since. I have done some more fishy upgrades to make it my own : )Update: 11-26-23My build is complete, I figured that if my case looks like a fish tank, why not add some fish : )This is simply the best case I have ever had, and will be my show case for some time. I’m so glad that Lian Li did not tint the glass on this case. Being that the glass is clear, lets the lights colors glow off the glass giving it even more class. If your even thinking of building in this case “and you have the desk space” then don’t even hesitate. It is fully worth the money.This was such a “huge” upgrade to my Corsair 680X. In fact, it made that case look kinda small in comparison. I have built my own custom desk and it’s sole design is to show off my build. But the Corsair simply did not have the space to show anything. It was a fairly large case but was very small in the actual build area. The Lian Li O11 Dynamic EVO XL is simply in a league of it’s own. It was a dream to build in and met all the requirements that I needed to replicate my old build, but in something that would actually show it off (compare to my old build pic). There was plenty of room for wire management and even gave me space for my hard drive switch. The build quality is top notch. If I had any complaint at all, it would be that the blanks that they use in the card slots do not stay tight when other cards are in the same locking tab. The blanks are thinner, and feel cheap compared to other brands I have built in, and thus require some sticky tape to keep them from vibrating around. It’s a small gripe, but if you have a sub woofer close to your tower, they will vibrate and make noise, and since they are specifically designed for this case, you can’t use other blanks to replace them.All in all, this will be the last case I build in for some time. It is my third, and every time I built in one of the older cases, it just didn’t feel right. This case is a work of art and will fill the bill for some time.Oh, one other small incidental issue is that due to the design of where the ssd’s mount and how they mount, you cannot use a 90 degree sata on your hard drive. The ssd’s mount the wrong direction and you cannot hook the sata cable up to them. I ended up just double sticking my drive backwards to the same area since it’s the only black sata cable I had. Not a huge issue, just something to note.
Defenestrator IV –
The best case I have seen so far
I picked this case out for my cousin because I thought he would like the aesthetic of the glass with the stripes of LEDs on the outside.Well. As long as you pay attention to the orientation of the fan mounting trays when you take them out, this case makes everything easy. There is far more than enough room for cable management in the back, and it comes with several velcro cable ties already installed. You get TONS of space inside for giant tower coolers and long GPUs. No extremely tight spots to run the CPU power connector, which has been an issue in MANY cases. And the PSU hidden in the back? Genius. That leaves space for three 120mm fans to blow directly into the GPU. And yes, you can pack TEN fans into this thing. I am extremely jealous of the airflow, and I bought a case for airflow…Just note that the case comes with zero fans. Unfortunately, I did not check until we were assembling. Heh.All the main panels you have to remove are attached with pegs. There are no screws to remove the side or rear panel. The top comes off with two non-captive thumb screws. The fan trays come out to make everything way easier with one non-captive screw. I didn’t do anything with hard drives, but I imagine those are similar.But the best feature of this case is the front panel connector. IT IS A SINGLE PLUG. I didn’t have to connect a separate two pin connector for the power LED, storage activity LED, power button, and reset button like every other case. It is one connector. I have been asking for this for years. Everyone I told was very excited about it (but not as much as I was because I am slightly insane).It’s the best case I have worked with so far, hands down. Stupid easy to work with and utterly beautiful.
Daniel –
Best case I’ve ever had and I’ve been building my own pcs for 45 years. Lian Li is an exceptional Pc case manufacturer. No parts missing or damaged. Everything was perfect! Extremely a happy camper with this purchase!
Brandon –
Great case. My only gripe is that the RGB cannot be made into a solid color.
Fahad Bukhari –
جميل جدا
Melisa Galvan –
Me gustó mucho el diseño de tanque de pescados al remover el soporte de los cristales, tiene mucho espacio podría decir que muy exagerado, es fácil de ensamblar solo hay que darse el tiempo de leer las instrucciones, lo que si es que es un case muy pesado y gigante tengan eso en consideración, tiene 3 maneras de configuración de los ventiladores y de la posición de la placa madre pero yo la deje en su configuración de Fabrica para no batallar con su instalación, respecto a la parte posterior tiene suficiente espacio para organizar tu cableado y sistemas de almacenamiento, un extra qué me agrado es que viene con un sujetador de tarjetas gráficas para esas gráficas masivas, se ve que es metal muy resistente y aparentemente soporta todo el peso de la gráfica sin dificultad, se supone es para placas madres atx o e-atx.
Miguel Montero –
Excelente y mucho espacio