H1 HYXN ATX PC Case – Pre-Installed with 7 PWM ARGB Fans – Dual Cavity Mid-Tower PC Gaming Case – with Type-C – Can Hold up to 3X 360mm heatsinks simultaneously (White, H1)
$11.99
Related Products
Product description
HYXN H1 ATX PC CASE
【Dual-chamber aesthetic design】HYXN H1 is a panoramic 270° wide-angle field of view ATX mid-tower rectangular structure chassis developed for aesthetics. The H1 is more spacious than most similar ATX cases on the market, providing users with a powerful and high-end configuration and a cool visual experience. The PC tower case is composed of two transparent tempered glass panels, which transmit light naturally, and the tempered glass has high hardness, not easy to be damaged, and has good sound insulation effect, providing great comfort for the office/gaming environment! (Length, width and height: 420*285*430mm/16.5″*11.2″*17.3)
【Vertical Airflow Dual Intake Channels】 The bottom and sides are the air intakes, and the top and rear are the main exhaust ports, creating a vertical airflow design that improves cooling performance and system efficiency. The top and bottom of the chassis are equipped with dust filters to reduce dust on the computer, achieve better heat dissipation performance than ordinary computer cases, and extend the service life of the hardware!
【Water and Air Cooling Solution】Thanks to its ultra-spacious design, the case can also accommodate up to two 360mm radiators (top and side) at the same time. Compatible with CPU air coolers up to 170 mm high. Enables powerful liquid cooling setups.
【Pre-installed 7 ARGB PWM fans】3×120mm reverse blade fans (ARGB PWM) at the bottom, 3×120mm reverse blade fans (ARGB PWM) on the side, and 1×120mm forward blade fans (ARGB PWM) on the rear. Using the daisy connection method, the cable management is more concise, no need for a controller to connect to the motherboard software to control it, customize a variety of lighting modes, and create cool and colorful lights! The fan speed can be controlled using software.
【Powerful Space Layout】The internal structure of the H1 chassis is carefully divided by HYXN, each space is cleverly arranged, and the H1 chassis has zero obstacles to installation, allowing users to carry out various DIY according to their preferences, providing you with full flexibility and achieving powerful configuration. Compatible with most mainstream hardware on the market, supports ATX/M-ATX/ITX motherboards, supports GPUs up to 400mm (15.75″), supports PSUs up to 200mm (7.87″), equipped with 1* HDD and 2* SSD mounts or (3* SSDs), and 7 expansion slots
【Input/Output Ports】1x Type-C 3.0, 1 x USB 3.0, 1 x USB 2.0, Microphone/Audio, Power Button
【Buy risk-free】The product quality is guaranteed, if you have any problems with your box, please feel free to click “S0ld-by-HYXN” to contact us, we will try our best to help you! HYXN strives to provide the best support to its customers!
13 reviews for H1 HYXN ATX PC Case – Pre-Installed with 7 PWM ARGB Fans – Dual Cavity Mid-Tower PC Gaming Case – with Type-C – Can Hold up to 3X 360mm heatsinks simultaneously (White, H1)
Add a review
$11.99
Sean Durkin –
Great Product
Easy to set up. The fans are daisy chained but seem to plug right into a RGB controller by the 3pin and Power. Quiet fans and easily replaceable too. Just more wires to deal with if not using the ones that came with case. 10/10 so far for airflow, look, and price
Jay –
Great budget friendly case
Surprisingly good, I bought this case with low expectations as my Corsair was becoming more obsolete by the year. I opted for this wider frame for an upcoming GPU upgrade. The only concern was the GPU mounting as it was pretty tight, had to flex the metal a bit as the card did not want to go in initially. But alas it did end up working and looked nice.Also I’ll add the fact they added reverse fans for proper intake with the nice aesthetic look. Not the greatest fans but does the job for now. All in all great for the price.
I bought this –
Best bang for your buck
This case feels like getting an NZXT H6 at a fraction of the cost. It is not premium like Phanteks or NZXT when it comes to features, but it has all the basics you would want in a clean, modern case.I mainly bought it for the looks, and I love it. I used a Phanteks 500D mid-tower for the last five years, and while this case does not have every detail of a higher-end build (no rubber grommets, fewer accessories to hide cables), the internal build quality is still solid.The fans can be a little finicky. I had an issue where the RGB cut in and out due to a pinched side panel wire, but once fixed they worked fine. My biggest wish is that the case included flaps or rubber grommets to better hide cables.On the plus side, it is roomy enough to easily fit my RTX 5090 and a 360mm AIO cooler mounted at the top. I tested the cooler as intake and exhaust, and with exhaust my GPU temps dropped noticeably.Overall, it is a great-looking case with solid value. If you want premium extras, look at Phanteks or NZXT. If you want sleek design and plenty of space at a budget-friendly price, this case delivers.
jessica bruce –
Great tower
It’s great, the lights and fans work great, looks awesome and was very affordable
soph –
Exactly what I wanted
Awesome case! I was able to fit everything with plenty of room. Cable management was easy and the fans being pre installed made my life so much easier. The LEDs change color randomly which is cool. I think it might react to stuff going on my screen but I’ve yet to fully figure it out. Definitely recommend!
Joevanni –
HYXN H1 ATX PC Case
Very easy case to build with. Lots of space for fans makes for good airflow and quiet build. lots of grommets. Function as I would expect it to. Sleek design. Overall, a pretty good case for your money.
John clark –
It’s a pc case.
Great looking case and easy to do a build in. Some of the case connections are kind of cheesy. The 7 fans preinstalled is a nice add on.
Brian Zelker –
Very good case
This is one of the nicest cases I’ve bought. Got here earlier than expected and is exactly what the pictures and the description says it is.
Fred –
La première fois que je construit un ordinateur. Avec ce boitier la tâche a ete tres facile. L espace est plus que nécessaire. Les fans en série donnent un visuel homogène et elle me semblent silencieuse. Le système d ouverture du boitier est difficile a comprendre au départ mais tres efficace. Ce boitier est une bonne plate-forme pour un bon bâtit si l espace n est pas un probleme car il est grand.
Spenny –
Very great case, mounting the rad on the side aloud for 4 exhaust fans without restriction, more positive airflow, easy to install and build everything, not having a rgb controller is great, just 1 plug into the mobo, fans are low speed, but work, it’s queit, having to move the side fans was easy, nice low temps all aroundAwesome case for first time builders
Dmitrii Boichuk –
Best pc case with good cable management even if u didn’t do cable management.
Client d’Amazon –
Super boitier. Nous aurions aimé un filtre supplémentaire, mais tout fonctiinne à merveille.
Haitran –
Its a nice case to build in but the only flaw is the argb fans do not come with a controller so there is no rgb but there not expensive their like 9-13$ on amazon